Lubricants

Lubricants
Oil Trend Monitoring offers you an analysis of fresh and used oil samples for example:

0 Engine oil
0 Gear oil
0 Hydraulic oil

It is examined whether the lubricants are suitable and can be reused in an adequate application. The scope of the analysis is adjusted to the respective product/problem. In this way you will receive information on the interaction of the oil filling in operation as well as a higher operational safety.

Comparing the physical/chemical property of the fresh oil to the respective used oil samples reduces the risk of an unplanned shutdown.

Engine Oils

Visco 40 ASTM D 445
Visco 100 ASTM D 445
Viscoindex DIN ISO 2909
Total contamination Zentrifuge DIN 51365 (only Diesel)
Total contamination Zentrifuge ASTM D 893 A/B (only Diesel)
Total contamination Filtration (5, 0,8, 0,45µm) SGS Inhouse
ICP Inhouse /ASTM D 5185
TAN ASTM D 664
TBN ASTM D 2896
BN ASTM D 4739
Water content ASTM D 6304-C
IR Oxidation DIN 51453
IR Nitration DIN 51453
IR Soot DIN 51452
Oxidationinhib.-IR-depletion SGS Inhouse
ZnDDP-depletion-IR SGS Inhouse
Fuel dilution Gasoline ASTM D 3525/DIN 51380/SGS Inhouse
Fuel dilution Diesel ASTM D 3524/DIN 51380/SGS Inhouse
Fuel dilution FAME SGS Inhouse

Extras

HTHS CEC-L-36-A-97 (Fresh Oil)
CCS ASTM D 5293 (Fresh Oil)
MRV ASTM D 4684 (Fresh Oil)
TGA DIN 51006
Foam Tendency Seq. 1-3           ASTM D 892
Foam Tendency Seq. 4 ASTM D 6082
DSC ASTM D 6186 / CEC-PL-085
Flash Point COC ASTM D 92
BN IP 400
Demulsifying  
Pourpoint (°C) SGS Inhouse


                                                                              TopTop

Gear Oil

Visco 40 ASTM D 445
Visco 100 ASTM D 445
Viscoindex DIN ISO 2909
Total contamination Zentrifuge ASTM D 893 A/B
Total contamination Zentrifuge SGS Inhouse
Total contamination Filtration (5, 0,8, 0,45µm) SGS Inhouse
ICP SGS Inhouse /ASTM D 5185
TAN ASTM D 664
BN ASTM D 4739
Water content ASTM D 6304-C
IR Oxidation DIN 51453
IR Nitration DIN 51453


                                                                              TopTop

Hydraulic Oils

Visco 40 ASTM D 445
Visco 100 ASTM D 445
Viscoindex DIN ISO 2909
Total contamination Filtration (5, 0,8, 0,45µm) SGS Inhouse
ICP SGS Inhouse /ASTM D 5185
TAN ASTM D 664
Water content ASTM D 6304-C
IR Spectra DIN 51451
Particle distribution ISO 4406-2-95


                                                                              TopTop
Contact

SGS Germany GmbH
Michael Kulikowski
Oil, Gas & Chemical Products, Fuel Technology Centre
Am Neuen Rheinhafen 12a
67346 Speyer

t: +49 6232 1301 42
0 Email